|
|
Steel
Shelving
- Easily adjustable shelf heights
- Maximum weight capacity of
450 lbs per shelf ( use
Re-Bars
for extra support).
Boxer Shelves
-
18, 20, or 22 gauge steel
-
Full welded box formation with Dual-end
formed channels and extra-strength corners
-
1-1/4" Box profile height
-
Accommodates either clip or nut & bolt
connection
|
Triple Bends For Added Strength
Boxer Shelves |
|
Offset Posts
- Rigid Roll-formed Offset Posts make installation simple
with Offset Compression Clips
- 14 Gauge Steel
- Holes on 1-1/2" Centers
- Uses Clips or Nuts & Bolts
|
Steel Offset Posts |
Steel Rail Angles
- Roll-formed Rail Angles are great for design
flexibility (slanted shelves)
- 13 Gauge Steel
- Holes on 1" Centers
- Uses #7 Clips or Nuts & Bolts
|
Steel Rail Angle
|
|
|
Adjustable Shelf Clips
|
Offset Clips for
Offset Angles Only
|
#7 Clips for
Steel Rail Angle Only
|
|
Sway Braces
- Used with Open Shelving Units
- Made of 1" Wide Hot-rolled strip with safety edges
- Ends are radiused and pierced for attaching to front
and rear posts
|
Steel Braces
|
Back &
Side Panels
- Used with Closed Shelving Units
- Made of Cold-rolled steel
- Punched along edges with 3/8" diameter holes on 1-1/2"
vertical centers
|
Back & Side Panels
|
Reinforcement Bars
- Used to reinforce front and /or back of shelf for extra
strength
- Angle 1" x 1" made of 12 gauge steel
- Best used on lower shelves to protect damage from
employees climbing the shelving
|
Steel Re-Bars
|
| ** IMPORTANT Top and
Bottom Shelves must be bolted to the angle and require 4 bolts per
shelf. Bottom Shelves should be bolted a maximum 4" above the floor. |
|
For more information on Steel Shelving and the
type of Steel Shelving that will best accommodate your operation, please
Contact Us through Email and a
Representative will get back to you. Or you can call or write to us
at
Par Steel Shelving Co.
7527 W 20th Avenue
Hialeah, FL 33014
Tel: 305-821-3000 | Toll Free: 800-881-1885
Fax: 305-556-5081
QUICK SHIP | SPECIALS | CONTACT US
RIVET SHELVING |
STEEL SHELVING
|
LOCKERS
PALLET RACKING |
PALLET RACK ACCESSORIES
WIRE DECKING |
WIRE PARTITIONS |
PALLET JACKS
|